Mineraluxe Water Treatment UML09737

• Deep cleans where you can't
• Cleans hot tub plumbing and other hidden surfaces
• All natural, blend of powerful concentrated enzymes and saponins - release built-up oils, greases, waxes, dirt, biofilm
• Concentrated enzymes digest what is released
• End result is water and CO2 and is safe to pump away to drain or lawn
• 24 Ounces

Dosage Amount:

• Add 1 bottle to hot tub water prior to draining and refilling
• Like most brands, add 24 to 48 hours prior to draining

Here's how easy it is to use:

1. Maintain hot tub water temperature at 95 degrees or higher.
2. Remove the filter cartridge.
3. Add bottle of Cleanse and Drain to hot tub water.
4. Run high speed pump for at least 5 minutes, with diverter valves in the neutral position, jets on and air off. It will foam!
5. Maintain water temperature and allow the hot tub water to circulate through the plumbing.
6. For best results, run high speed pump two or three times over a 24 hour period.
7. Drain hot tub completely. Rinse and refill hot tub.