Additional Information
Voltage | 230 |
Cord Type | NONE |
Discharge Location | Side |
Discharge Size | 1-1/2" MBT |
Number of Speeds | 1 |
Frequency (Hz) | 60 |
High Speed (Amp) | 1 |
Spa Brands | Sundance/Jacuzzi |
Alternate Part Numbers
- SD6500-907
- WTC50M-USA
The pump wet end comes in the position that Sundance and Jacuzzi uses but can be turned to a different position simply by loosening the 4 bolts that hold on the wet end and turn the wet end to the position you need (12:00, 3:00, 6:00 or 9:00 o'clock). The bolt pattern for mounting the pump to your base could be different for non Sundance/Jacuzzi usage. The bolt spacing from same side is 3 inches. If you are using this pump in a Sundance/Jacuzzi spa the wet-end will need to be rotated once received to match the plumbing. Requires 7MM metric socket.
Used in the following Sundance models: Select Series 07/19/2011+, 880 Series 07/19/2011+, Aspen 2012+, 780 Certa/Montclair 04/2013+, & 780 Hamilton/Chelsee 03/2013+
Used in the following Jacuzzi models: All J-500 Models (2015+) All J-400 Models Except J-415 (1/26/2012+) J-415 Models Only (10/2/2013+), All J-375/J-365/J-355/J-345/J-335 Models (2012+), All J-LX/J-LXL Models (2011+)
*NOTE - This pump wet end comes in the position that Sundance uses. It can be turned to different position by loosening 4-bolts and turning wet end in position you need (12:00, 3:00, 6:00, 9:00)
**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**
Voltage | 230 |
Cord Type | NONE |
Discharge Location | Side |
Discharge Size | 1-1/2" MBT |
Number of Speeds | 1 |
Frequency (Hz) | 60 |
High Speed (Amp) | 1 |
Spa Brands | Sundance/Jacuzzi |