Balboa BP7 Spa Control 4.0kW Flow Thru Heater G6405

Control System Kit, Balboa BP7, all outputs are 230V, 4.0kW, 1-2 Pumps w/TP500 Topside & Light Cord
SKU
G6405

Create an account or Log in to view pricing and stock information

Notify me when this product is in stock

Detailed Description

Balboa BP7 Spa Control 4.0kW Flow Thru Heater G6405
The Next Generation of Balboa BP Hot Tub Control Systems is finally here.

With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand’s non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can also be used as 110v or 220v.


G6405 BP7 Programming And topside Configuration click  HERE 


Features:

  • Supports all TP and SpaTouch topsides
  • Supports all BP ancillary products (ControlMySpa, BBA, CZ, and Status Pro)
  • Plug-N-Click Heater
  • WiFi Included

Kit Includes:

  • G4361 - Balboa BP7 System with 4.0kW Heater
  • 57238-01 - Balboa TP500 Panel, Less Overlay
  • 17183 - TP500 Panel Overlay (6-Button, Rectangle)
  • 25098 - Wire Assembly, 8ft for spa light
  • 15480 - Panel Bezel (Adapter Plate)

REPLACEMENT NOTE: Gecko in.ye-5 is the best retrofit option. Can also use in.yj as replacement option - may be cheaper alternative. Please see below for substitute options.


-CAN REPLACE ANY BP BALBOA SYSTEM* - While using the existing topside that is already installed on the spa

-CAN REPLACE ANY BALBOA VS OR EL SYSTEM* - When you match it with any TP or SpaTouch™ topside panel


*Both the Circ pump and Ozone can be converted to 120V, however, they will be the same voltage after conversion. (Both 120V or both 240V.)


*If a 24-hour circulation pump is being installed, it must have no less than a 23 GPM flow. Laing, Grundfos, or Waterway Tiny Might pumps do not perform at this rate and cannot be used. 

Additional Information

System Voltage 230V
Heater Type Flow Thru
Heater Wattage 4.0kW
Keypad Included Included
Supports Pump1 + Blower/Pump2

Alternate Part Numbers

  • 54219
  • 54216
  • 54217
  • 54220
  • VS300
  • VS500Z
  • VS501Z
  • VS501SZ
  • VS503SZ
  • VS504SZ
  • VS510SZ
  • VS510DZ
  • VS511Z
  • VS511SZ

Substitute(s)

Suggested accessories