Additional Information
System Voltage | 115/230V |
Heater Type | Flow Thru |
Heater Wattage | 4.0kW |
Keypad Included | Included |
Supports | Pump1 + Blower/Pump2 |
Alternate Part Numbers
- G-6402
Balboa BP100G2 Bundle with attached 4.0KW heater and the 4 button TP200 topside control panel. This compact basic control system is ideal to retrofit in smaller hot tubs with 1 or 2 pumps. Can run on 120 volts for single pump applications (configuration required) Smoothly integrates with bwa, ControlMySpa, bba. The BP100/200 works with all of Balboa's TP and SpaTouch Panels.
Features:
REPLACEMENT NOTE: IN.YJ has remote heater, but comes with stand. Check space and measurements to make sure new pack fits.
*The Balboa BP100G2 is factory configured for 240 volt applications, pump(s) and ozonator must be 240 volts.
Can be configured for 120 volt but pumps and ozonator must all be 120 volts.
*If installing a 24 hour circulation pump, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.
System Voltage | 115/230V |
Heater Type | Flow Thru |
Heater Wattage | 4.0kW |
Keypad Included | Included |
Supports | Pump1 + Blower/Pump2 |